Do you need assistance with What To Do If You Break Your LED Light Remote? Depending on whether your LED lights are smart or not, you can still utilize them to some extent, even if you’ve misplaced the remote control. Let’s find out more!
The LED lights don’t have a remote application because they can be turned ON/OFF without one, but if the lights aren’t smart, they can’t be changed in color. You can only do something if you lose the remote control for your smart LED lights!
What To Do If You Break Your LED Light Remote?
If you’ve misplaced the remote control, you are connecting an LED strip to one of your wall sockets. You’ll require a device like this 12V DC 2A wall power supply adapter. Remove the receiver from the strip, link it to one of these adapters, fill it in, turn on the switch, and you’re done.
The Top 4 Causes Why Led Light Remotes Might Fail? (With Solution)
Make sure your LED strip is functional before doing anything else. Disconnect the entire system, plug it back in, and check to see if all the colors are lit up, or try it out with a different remote. Here are various causes of your remote’s malfunction and potential fixes, assuming they’re all working properly:
There Is No Battery
Before you purchase an LED strip remote, it may be stored for a long time. It could begin to drain if the battery is not completely sealed with the thin plastic sheet (intended to stop electrons from flowing out of the battery during free time).
If your remote has an indicator light, you’ll notice that it doesn’t light up when you press the buttons.
How To Treat It?
- The old battery can be easily swapped out for a new one to solve this problem.
- Most of these batteries utilize CR2025 batteries, which are reasonably priced and generally accessible.
- The remote has disconnected by itself.
Making sure everyone is buddies is crucial, just like when using remote controls for ceiling fan lights and other gadgets. Most LED strip remote controls feature an unreliable pairing system that causes them to disconnect from the LED strip receiver if the battery is running low or the connection is slack. In this instance, the tiny lights would be operational, but the LED strip would not be.
How To Fix It?
- Remove the LED strip’s power supply.
- Remove the remote’s batteries.
- The dimming cable (the LED controller)
- Must have both ends unplugged.
- Put new batteries in the LED controller and reconnect it.
- Until the indicator blinks once, press and hold down both “SPEED-” and “SPEED +” for a few seconds (this step may vary depending on the pairing instructions in your manual).
The LED Controller Has To Be Reprogrammed
If you’re using a 44- or 24-key LED strip remote, the LED may react to the remote control, but some or all of the colors may be out.
The remote ought to work with your LED light strip in that scenario. However, it is necessary to reprogram the LED controller itself.
How To Repair It?
- To begin with, the LED controller should be unplugged and replugged (this is not necessary for reprogramming, but you should do that just in case the loose connection is the issue).
- On the remote, press the “RED” button. (Although it should be resolved by the end of this article, the LED lights should illuminate in a color other than red.)
- Input the “OFF” key.
- It would help to push the “FADE7” button, typically located in the bottom right corner, whether you’re using a 24- or a 44-key LED strip remote.
- Use the “ON” button to restart the lights, then hit the “RED” color again.
- When you push “RED” on the remote, keep doing so until the red lights come on.
Interference Is Affecting The Remote’s Signal
The majority of remote controls use Radiofrequency (RF) waves. In contrast to infrared (IR) remote controls, equipment that uses these waves are often subject to signal interference from gadgets that generate similar wavelengths.
Solution: Simply changing the LED controller receiver or adding a new battery should fix the issue.
A Broken Remote Chip
If all else fails, the chip has malfunctioned, or the remote is simply defective.
Solution: Finding a compatible remote should not be difficult because these devices are incredibly accessible and inexpensive.
Conclusion
This post has given you all the details you require to do if you break your led light remote. Consider the points above and enjoy the benefits and simplicity of employing a brand-new LED lighting system.
The significant advice in this post should be reiterated: always check with the original seller to see if they have any extra remotes in stock before purchasing elsewhere. That’s all I have on What To Do If You Break Your LED Light Remote? Gratitude for reading!
