Here I start my discussion about How To Attach A Bed Skirt With Velcro? A pleated bed skirt with a trendy flat panel lends the finishing touch to a well-dressed bed. The hanging fabric hides the box spring, bed frame, and anything stored underneath. A DIY bed skirt can be produced quickly using Velcro and a little fabric adhesive.
Choose a material that is opaque and medium in weight, such as cotton, velvet, or denim. To tie in the pleated addition, choose a fabric that matches their current bedding, complements neutral, or is consistent with the room’s style. Using Velcro, assemble and attach a bespoke pleated bed skirt.
How To Attach A Bed Skirt With Velcro? Follow This
Using a tape measure, measure the length of the foot (or end) and sides of the bed for the fabric you’ll need. To integrate the pleats, add 4 inches for every 2 feet of length. For example, a queen bed is around 18 feet in diameter, so you’d add 36 inches, or 3 feet, for 21 feet. Instead of frillier, ruffle-style wrinkles, this will supply enough material for a more modern, widely spread flat-panel pleating.
Measure from the mattress’s bottom to the floor a basic pleated bed skirt is 18 inches long, but you may need more or less material depending on your bed frame. For a 1-inch hem at the top and bottom, add 2 inches to the height of your bed skirt. Mark the backside of the fabric and cut it to size. In a workplace, use the floor or a side table.
Working with the backside of the cloth facing up fold and iron a 1-inch hem at the top and bottom; to secure the hems, apply fabric glue under the folds. To protect the work surface from the iron heat and the adhesive, place towels under the fabric. Permit the glue to cure for the time fixed on the label before continuing.
Make a right-side-up turn of the fabric. To begin pleating, locate the fabric’s lengthwise center. To find the center, fold it in half, mark it, or measure and mark it. You’ll have evenly placed pleats around the bed if you start in the center.
For each pleat, cut two 1-inch strands of self-adhesive Velcro with a peel-and-stick backing. A queen-sized bed skirt has nine wrinkles, so you’ll need to cut 18 little Velcro pieces. Using both hands simultaneously, overlap 2 inches of fabric along the top hem from the right and left of the center to meet, creating a 4-inch-wide, flat pleat. To keep the pleat in place, iron it.
How to Make a Bedskirt with Velcro: A Comprehensive Guide
Making a bedskirt with Velcro is a simple and practical DIY project that can add a touch of elegance to your bedroom decor. Here’s a step-by-step guide on how to create your own Velcro bedskirt.
Materials Needed
- Fabric (The amount depends on the size of your bed)
- Velcro
- Tape measure
- Scissors
- Iron
- Straight pins or a staple gun
Steps
- Measure Your Bed: Measure the length and width of your bed. If you want to include pleats, add an extra 1 to 2 inches per pleat to your measurements.
- Cut the Fabric: Cut your fabric according to the measurements. Remember to add a few extra inches if you want the skirt on the side of the bed to overlap the skirt piece on the end of the bed.
- Hem the Edges: Iron in your hems on the top and bottom of your fabric. This will give your bedskirt a clean, professional look.
- Attach the Velcro: Attach one side of the Velcro to the top edge of your fabric and the other side to the box spring. Make sure they align perfectly.
- Attach the Bedskirt: Stick the Velcro sides together, ensuring the bedskirt hangs evenly on all sides.
- Optional Pleats: If you want to add a touch of eleganceto your bedskirt, consider adding a box pleat in the middle of your length of fabric. This not only makes it slightly fancier, but it also hides the seam from sewing the two strips of fabric together.
Remember, the beauty of a Velcro bedskirt is that it’s easy to remove for washing and then reattach. This DIY project should only take about a day or even an afternoon to complete.
Tips for a Perfect Bedskirt
- Always measure twice to ensure accuracy before cutting your fabric.
- Choose a fabric that complements your bedroom decor.
- If you’re not confident in your sewing skills, consider using iron-on hemming tape for a no-sew option.
By following these steps, you can create a beautiful and functional bed skirt that adds a touch of elegance to your bedroom.
Conclusion
To conclude our topic of discussion about How To Attach A Bed Skirt With Velcro? Making your bed skirt is not as complicated as it may appear. And, by employing a little innovation in the form of Velcro tape, you’ll save time, energy, and fabric in the process. The concept may appear to be a bit of a cheat, and it is in some ways, but the results are fantastic, and no one will be able to tell the difference.
